English

PIN load cell type H - PINH

Utilcell Products PIN load cells PIN load cell type H - PINH
img

Custom dimensioning LOAD PIN manufactured under the client requirements, specially designed for replacing and upgrading the existing axles and provide reliability measurements of the loads applied on the same axis. Main features: easy to replace and install without any system modifications, robust construction in high strength stainless steel, IP68 working temperature from -20°C to +90°C and available up to +180° for working in high temperature atmospheres, fast delivery terms.

  • Measuring load pin with customized diameters and lenghts to replace existing axles
  • Double shear beam load cell
  • Measuring element from high tensile stainless steel
  • Ingress protection IP68
  • Option of wireless contact with receiving indicator.
  • Option of integrated analog output  (0/4 - 20 mA , 0-10V)
  • Option of enhaced superior temperature up to 180ºC
  • Option of electrical connector
  • Option ATEX version for zone 0-1-2 (gas) and 20-21 (dust)

Technical documentation

Nominal capacities to be specified kg
Accuracy class 0,5 %
Minimum dead load 0 %Ln
Service load 150 %Ln
Safe load limit 400 %Ln
Total error < ± 0.5 %Sn
Repeatability error < ± 0.2 %Sn
Temperature effect on zero < ± 0.02 %Sn/5K
Temperature effect on sensitivity < ± 0.02 %Sn/5K
Creep error (30 minutes) < ± 0.1 %Sn/5K
Temperature compensation -20 až +60 ° C
Temperature limits -20 až +90 ° C
Nominal sensitivity (Sn) 1 ± 0.25% mV/V
Excitation volgage 3 .. 15 V
Input impedance 400 ± 30 Ohm
Output impedance 352 ± 5 Ohm
No load output  2 %Sn
Insulation resistance > 5000 MOhm