Tension load cell. Measuring element from steel alloy.2000 divisions O.I.M.L. R60 class C. Protected IP 66 (DIN 40050). Protected against corrosion by nickel-plated treatment. 6 wire (sense) electrical connection.
| Nominal capacities | 20-25 | t |
|---|---|---|
| Accuracy class | 2000 | n. OIML |
| Minimum dead load | 0 | %Ln |
| Ultimate load limit | 200 | %Ln |
| Total error | < ± 0.03 | %Sn |
| Repeatability error | < ± 0.015 | %Sn |
| Temperature effect on zero | < ± 0.01 | %Sn/5K |
| Temperature effect on sensitivity | < ± 0.006 | %Sn/5K |
| Creep error (30 minutes) | < ± 0.025 | %Sn/5K |
| Temperature compensation | -10 až +40 | ° C |
| Temperature limits | -20 až +70 | ° C |
| Nominal sensitivity (Sn) | 2 ± 10% | mV/V |
| Nominal input voltage | 10 | V |
| Max. input voltage | 15 | V |
| Input impedance | 400 ± 20 | Ohm |
| Output impedance | 350 ± 3 | Ohm |
| No load output | < ± 2 | %Sn |
| Insulation resistance | > 5000 | MOhm |
| Max.deflection (at Ln) | 0.3 - 0.5 | mm |
Optional sensitivity of 2 ± 0,1% mV/V
Overdimensioning properly the load cell is advised. Choose the nominal capacity taking into account that the security factor will be determined by the ratio between ultimate load and the user maximum working load.
