English

Load cell M260

Utilcell Products Load cells Load cell M260
img

Double bending beam load cell. Viscous damping specially for use in dynamic weighing applications. Stainless-steel housing. Protected agains humidity IP68 (EN 60529). Single point load cell, for off-center loads on platforms up to 500x500 mm (for capacities 5..35kg) and 600x600mm (for capacities 50..200kg). Integrated on-center overload protection, with a dual stopper for up and down loads.

  • Double bending beam load cell
  • Viscous damping specially for use in dynamic weighing applications:
    faster settling time, higher weighing speeds and increase of load cell.
  • Stainless-steel housing.
  • Protected agains humidity IP 68 (EN 60529)
  • Single point load cell, for off-center loads on platforms up to 500x500 mm.
  • Integrated on-center overload protection, with a dual stopper for up and down loads.

Technical documentation

Nominal capacities 5-7,5-10-15-20-35-50-75-120-200 kg
Accuracy class 3000 n. OIML
Minimum dead load 0 %Ln
Service load 120 %Ln
Safe load limit 150 %Ln
Total error < ± 0.013 %Sn
Repeatability error < ± 0.01 %Sn
Temperature effect on zero < ± 0.01 %Sn/5K
Temperature effect on sensitivity < ± 0.006 %Sn/5K
Creep error (30 minutes) < ± 0.012 %Sn/5K
Temperature compensation -10 až +40 ° C
Temperature limits -20 až +70 ° C
Nominal sensitivity (Sn) 2 ± 10% mV/V
Nominal input voltage 10 V
Max. input voltage 15 V
Input impedance 400 ± 20 Ohm
Output impedance 350 ± 3 Ohm
No load output < ± 2 %Sn
Insulation resistance > 5000 MOhm
Max.deflection (at Ln) 0.2 - 0.4 mm

SWIFT

1020

SMART

MATRIX II

SGA

LCD20