English

Load cell M200

Utilcell Products Load cells Load cell M200
img

Double bending beam load cell with Beryllium-Copper measuring element. Viscous damping specially for use in dynamic weighing applications. Stainless-steel housing. Protected against humidity IP 65 (DIN 40050). Single point load cell, for off-center loads. Integrated on-center overload protection. 6 wire (sense) electrical connection.

  • Double bending beam load cell with Beryllium-Copper measuring element :
    • Outstanding linearity and hysteresis
    • High resistance at fatigue and shock
  • Viscous damping specially for use in dynamic weighing applications:
    • Faster setting time
    • Higher weighing speeds
    • Increase load cell life
  • Stainless-steel housing
  • Protected against humidity IP 65 (DIN 40050)
  • Single point load cell, for off-center loads
  • Integrated on-center overload protection
  • 6 wire (sense) electrical connection

Technical documentation

Nominal capacities 2-3-5-7.5-10-15-20-30 kg
Accuracy class 0.05 %
Minimum dead load 0 %Ln
Service load 150 %Ln
Safe load limit 200 %Ln
Total error < ± 0.05 %Sn
Repeatability error < ± 0.015 %Sn
Temperature effect on zero < ± 0.04 %Sn/5K
Temperature effect on sensitivity < ± 0.02 %Sn/5K
Creep error (30 minutes) < ± 0.035 %Sn/5K
Temperature compensation -10 až +40 ° C
Temperature limits -20 až +50 ° C
Nominal sensitivity (Sn) 2 ± 10% mV/V
Nominal input voltage 10 V
Max. input voltage 15 V
Input impedance 400 ± 20 Ohm
Output impedance 350 ± 3 Ohm
Počáteční hodnota nuly < ± 2 %Sn
Insulation resistance > 5000 MOhm
Max.deflection (at Ln) 0.2 - 0.4 mm

SMART

SWIFT

1020

MATRIX II