Custom dimensioning LOAD PIN manufactured under the client requirements, specially designed for replacing and upgrading the existing axles and provide reliability measurements of the loads applied on the same axis. Main features: easy to replace and install without any system modifications, robust construction in high strength stainless steel, IP68 working temperature from -20°C to +90°C , fast delivery terms.
Load PIN ATEX
Technical documentation
| Nominal capacities | to be specified | kg |
|---|---|---|
| Accuracy class | 0,5 | % |
| Minimum dead load | 0 | %Ln |
| Service load | 150 | %Ln |
| Safe load limit | 400 | %Ln |
| Total error | < ± 0.5 | %Sn |
| Repeatability error | < ± 0.2 | %Sn |
| Temperature effect on zero | < ± 0.02 | %Sn/5K |
| Temperature effect on sensitivity | < ± 0.02 | %Sn/5K |
| Creep error (30 minutes) | < ± 0.1 | %Sn/5K |
| Temperature compensation | -20 až +60 | ° C |
| Temperature limits | -20 až +90 | ° C |
| Nominal sensitivity (Sn) | 1 ± 0.25% | mV/V |
| Excitation volgage | 3 .. 15 | V |
| Input impedance | 400 ± 30 | Ohm |
| Output impedance | 352 ± 5 | Ohm |
| No load output | 2 | %Sn |
| Insulation resistance | > 5000 | MOhm |
